240SX
This page outlines the changes that Ontario Race Fabrications have made to Adam Huchinson's Nissan 240SX.
Click each thumbnail to view a larger version of the image.
 |
Philip's 240SX ready for the roll bar. |
 |
The 1.75 diametre, 120 thou DOM roll bar material. |
 |
Adam cutting the tubing to size. |
 |
The main hoop starting to take shape. This is the first set of many bends to make the hoop fit correctly. |
 |
Adam cleaning the surface to get it ready for welding. |
 |
Philip notching the tubing so that it fits exactly into the main hoop. These tubes are the two main arms that extend from the hoop. |
 |
The plates for the rear arms that are now welded into place. |
 |
The welded plates. |
 |
The rear arm being test fit before welding. |
 |
The roll bar from the front, being test fit. |
 |
Philip trapped in his cage :) |
 |
The base plate welded onto the rear arm. |
 |
Both arms welded down. |
 |
The almost complete roll bar. Only a diagonal brace and harness braces need to be added. |
