Honda Civic Rollcage

This page illustrates the installation of a rollcage in a Honda Civic.We added the forward portion of the cage to an existing rollbar setup.

This rollcage was made from 120 thou.1.5 inch diameter DOM tubing.

Click each thumbnail to view a larger version of the image.

	The baseplate tack-welded in place.
	The complete "A" arm down tube.
	The stripped interior of the Civic.
	The header bar connecting to the "A" arm.
	The header bar.
	The quality of angle tightness achieved on the down tube of the "X" bar.
	The down tube of the "X" bar.
	The "X" bar, complete.
	The front half of the roll cage complete; all that is left is preparing the tubes for welding, the welding, and the addition of a few gussets.
	The final "X" bars, welded in place.
	The fully-floating racing seat mount.
	The fully-floating racing seat mount from another angle.
	The final roll cage all welded up.